Technical
Why does ZX self-priming sanitary pump take too long to prime?
The ZX self-priming pump should complete the priming process quickly under normal conditions.
Prolonged priming time is often related to the priming system, sealing performance or key component status.
Common issues include insufficient priming liquid (must fill 2/3 of chamber), air leaks in suction lines (check with soap bubbles), and impeller wear (clearance should ≤0.5mm).
For mechanical seal leaks (models 104-22/108-25), replace with identical specifications and ensure proper spring compression.
Always tighten flange bolts diagonally and avoid unnecessary valves/elbows in suction piping as specified in the manual.