MP Series Magnetic Pump
MP-6R ~ MP-120R / MPH-400
Seal-less magnetic drive circulating pump with fully sealed coupling for leak-free handling of corrosive chemicals; GFRPP or stainless steel body with ceramic shaft and SiC bearing, 6-260 L/min, head up to 18 m.
Drag to rotate · Scroll to zoom · Fullscreen
Overview
The MP series uses magnetic coupling instead of a mechanical shaft seal, giving a fully sealed pump for corrosive chemical transfer.
Operating Principle
The motor drives the outer magnet; the field penetrates the isolation sleeve and drives the inner magnet and impeller. The medium stays sealed inside, and the coupling slips under overload.
Selection
Please provide flow, head, medium (name/concentration/temperature), specific gravity and port type. MP-6R/10R use a fixed shaft; MPH models are high-power plastic pumps.
Key Characteristics
Magnetic coupling replaces the mechanical shaft seal, eliminating leakage and seal wear.
GFRPP or stainless steel body, alumina ceramic shaft and SiC bearing for acids and chemicals.
Non-contact torque transmission slips under overload, protecting motor and pump.
Smooth, low-vibration running with wear-resistant ceramic bearings for continuous duty.
Compact body, interchangeable hose/thread ports, tool-free pump head servicing.
Applications
- Chemical industry
- Pharmaceutical industry
- Electroplating
- Photographic processing
- Electrical appliances
- Metal industry
- Mining industry
- Food industry
- Medical
- Water treatment
- Pollution control
- Drinking water systems
Model Notes
| Code | Meaning |
|---|---|
| MP | MP series magnetic drive circulating pump |
| 20R | Product spec: discharge diameter code (R = circulating) |
| X | Type: none = standard; M = threaded ports; X = high flow; Z = high head; T = special; N = modified |
| 100 | Voltage: none = 220V; 100 = 100V; 380 = 380V |
| MPH-40-D-CV-5-D | MPH plastic magnetic pump: 40 = discharge code; D = plastic body; CV = motor power (0.4/0.75/1.5/2.2 kW); 5/6 = 50/60Hz |
Construction
| Part | Material / Notes |
|---|---|
| Pump shell | GFRPP / stainless steel (CFRPP optional) |
| Impeller | Magnets moulded into the impeller, alumina ceramic shaft; open / closed / semi-open |
| Pump shaft | Alumina ceramic; MP-6R / 10R use fixed-shaft design |
| Active magnet | Ferrite magnet, 6-pole / 8-pole, coupling through the rear shell |
| Isolation sleeve | GFRPP with bearing at the bottom (no bearing for MP-6R / 10R) |
| O-ring | FKM or EPDM |
| Motor | Standard AC motor, brushless DC optional |
Materials
- Stainless steel
- Glass fiber reinforced polypropylene
- Alumina ceramic
- Ferrite magnet
- FKM / EPDM
Chemical Resistance Guide
Ratings: A excellent (A1-A6), B good, C fair, X not recommended. Reference values at ambient temperature; ask us for the full guide.
| Medium / Concentration | PP | PTFE | FKM | EPDM | 95% ceramic |
|---|---|---|---|---|---|
| Sulfuric acid 0-10% | A4 | A6 | A6 | A4 | A5 |
| Sulfuric acid 75-100% | B2 | A4 | A4 | B2 | A5 |
| Nitric acid 30% | A2 | A6 | A6 | A2 | A5 |
| Hydrochloric acid 0-25% | A4 | A6 | A3 | A3 | A5 |
| Hydrofluoric acid 10% | B2 | A6 | A3 | A3 | — |
| Acetic acid 20% | A2 | A6 | B1 | A2 | A5 |
| Sodium hydroxide 20% | A3 | A6 | B1 | A3 | — |
| Sodium hypochlorite 10% | B1 | A6 | B1 | A4 | — |
Frequently Asked Questions
Selection depends on your medium (name, viscosity, corrosiveness), required flow rate, head/distance, and operating environment (temperature, explosion-proof requirements). Contact our technical team with your working conditions for a free recommendation.

