How to solve DP diaphragm pump not sucking liquid or insufficient flow?
When DP series diaphragm pump fails to suck liquid or shows insufficient flow, first check power supply and motor operation.
For running motor without liquid intake, inspect inlet pipe blockage (clean/replace filter) and check valve ball/seat for debris (clean with alcohol).
Low flow rate often caused by cracked diaphragm (replace EPDM diaphragm) or worn valve balls (test by reverse air flow).
Gradual flow reduction with noise indicates mechanical issues like bearing wear (add grease or replace motor assembly) or solid particle ingress (install 100mesh pre-filter).
For intermittent flow, ensure stable power supply (±10% voltage variation), shorten suction line (<3m), and install degassing chamber for volatile liquids.