Why does DP mini diaphragm pump leak during operation?
Leakage in DP series mini diaphragm pumps usually occurs at pump body connections, pipelines or sealing parts.
For leaks at pump body connections, check bolt tightness and O-ring conditions. Replace deformed O-rings (part No.DP-OR-01) and apply silicone grease during assembly.
Pipeline leaks at joints often come from loose clamps or insufficient PTFE tape. Re-wrap thread connections with 3-5 layers of tape in opposite direction to thread rotation.
Periodic leakage indicates diaphragm damage (part No.DP-DP-02). Replace diaphragms with holes over 0.5mm and polish worn linkage shafts.
Simultaneous inlet/outlet leakage suggests valve ball (DP-VB-04) contamination or wear. Clean with ultrasonic cleaner or replace complete valve set (DP-VS-05).
Oil stains at motor shaft end require bearing grease cleanup or shaft seal (DP-SH-06) replacement with high-temperature grease application.